Description:

Magnetic contact is one of the most reliable sensors for sensing the status of open and close of windows, doors and other devices. It consists of a magnetic sensor (contact switch) and magnetic. The magnetic contact built-in high life-span reed switch, with NO output for connection of intrusion alarm panels, access control systems or other devices. There are two kinds of installation methods for magnetic contact: surface mount installation and recessed mount installation. The MC-36 is a recessed mount type.

Specifications:

• Contact Type:  Normally open
• NO means Normally Open: when the magnet separates, the circuit is conductive( light on ); When the magnet together, the circuit is not conductive ( light off )
• Contact Capacity:  300mA
• Voltage: DC 100V
• Power: 28V @ 1.0A
• Color: Brown
• Cable Length: 30cm
• Size: 22mm (L) X 23mm (outer dia)

Installation Instructions

1. Drill installation hole with a diameter of 10 mm.

2. The door and window magnet should be installed at the closed position of the door/window/drawer.

3. The magnet part is installed in the movable door and window. The switch part is installed in the fixed door and window frame. The switch part and the magnet part should be aligned as much as possible.

4. The door magnet should be away from the strong magnetic field interference source such as a transformer. Otherwise, the working characteristics of the door magnet will be changed and possible wrong actions.