مديول كاميرا 2 ميجابكسل || 2MP-OV2640 Camera Module

35 ر.س (الضريبة : )

الكمية:

الإجمالي :

نظرة عامة
المراجعات

Features:

1. OV2640 image sensor has 200W pixels (1632 x1232 pixels), its small size, low work voltage, monolithic UXGA camera and image processor provide all the functionality.

2. Can be output by SCCB bus control, the whole frame, sampling, take the way such as window resolution of 10 sampling data.The product UXGA image to a maximum of 15 frames per second.Users can complete control of image quality, data format and transmission mode.

3. All the process of image processing functions, including gamma curve, white balance, saturation and chroma can be through the SCCB programming interface.OmmiVision image sensor application of sensor technology, unique to reduce or eliminate the optical or electronic defect such as fixed pattern noise, tail, float away, etc., improve the quality of the image, get clear and stable color images.

Low high sensitivity, low voltage is suitable for embedded application
Low standard SCCB interface, compatible with the I2C interface
RawRGB, RGB (GRB4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format
Support UXGA, an SXGA, VGA, QVGA, QQVGA, CIF, QCIF and until 40 x the size of the different sizes
Low support automatic exposure control, automatic gain control, automatic white balance, automatic eliminate the light stripe, automatic black level calibration. Including the color saturation, color image quality control
Phase, gamma, sharpness ANTI_BLOOM Settings, etc.
Low support image scaling, translation and window Settings
Support for image compression, can output JPEG image data
Low with embedded microcontroller processor
Integrated active vibration crystal 12 m, without external clock
“Integration”, working in a power supply to 3.3 V

Specifications:

Sensor size: 1/4 inch
Pixel: 1600 x 1200 (200W)
The output format: RGB565/JPEG/YUV/YCbCr, etc
Control interface: SCCB
Working voltage: 3.3 V
Module size: 28 x 28mm

Pinouts:

Number	Name	Instruction
1	GND	Ground wire
2	VCC	3.3V power input
3	SCL	SCCB clock line (IN)
4	VSYNC	Frame synchronization signal
5	SDA	SCCB data line (IN/OUT)
6	HREE	Line reference signal (OUT)
7,9-14,16	D0-D7	Data line (OUT)
8	RESET	Reset signal (low level)IN
15	PLCK	Pixel clock (OUT)
17	PWDN	Power-down mode (high level) OUT
18	NC	Not used